Notepad (0)

ODU AMC® High-Density Rear panel mount receptacle, Size 0, IP6K8 / IP6K9K, 16 Contacts, B (red) Key

Part number
Type of connector
Rear panel mount receptacle
Break-Away, Push-Pull
Size 0
B (red)

To get a free sample or make an inquiry, add the product to the notepad.

Add to Notepad

Illustrations may differ from original product. Dimensions, unless otherwise specified, in mm. Positions view from termination side.

Contact Insert Description

Number of contacts
Contact type
Contact diameter
0.3 mm
Insulator material
Wire cross section
28 AWG
Termination type
Reverse gender on request

Technical information

Nominal current single contact
1 A
IEC 60512-5-2:2002 (DIN EN 60512-5-2:2003)
Test voltage
0,75 kV AC

All shown connectors are rated to a safety extra low voltage (SELV) of less than 50 V AC / 75 V DC, according to IEC 61140:2016 (VDE 0140-1:2016) Protection against electric shock - Common aspects for installation and equipment. In case other standards rule a specific use of the connector, the application specific safety criteria shall be considered first. In this context, lower voltage ratings may be valid. Warning: Danger to life for operating voltages above 50 V AC / 120 V DC!

Mechanical and Environmental data

Degree of protection*
IP6K8 / IP6K9K
Operating temperature
-51°C - 125°C
Mating cycles
*mated condition

Material and Surface Treatments

Cu-alloy with ruthenium finish
Cu-alloy with gold finish

Mating Connectors

2 Result(s)

General Information:

All shown connectors are defined without breaking capacity (COC) according to IEC 61984:2008 (VDE 0627:2009).
The respective selected ODU connectors with data transfer functionality can transmit common data transmission such as HDMI® 2.0, USB® 3.2 Gen 1x1, FireWire® and eSATA®, but they are not HDMI®-, USB®-, FireWire®- and eSATA®-standard connectors.
ODU reserves the right to make changes based on the current state of knowledge without prior notice without being obliged to provide replacement deliveries or refinements of older designs.