Notepad(0)

ODU MEDI-SNAP® Front Panel Mount Receptacle, Size 1, IP50, 3 Pos., 0° Key

Part number
G11M07-P03LPH9-0030
Type of connector
Front Panel Mount Receptacle
Locking system
BreakAway, PushPull
Size
1
Keying
Yes

To get a free sample or make an inquiry, add the product to the notepad.

Add to Notepad

Illustrations may differ from original product. Dimensions, unless otherwise specified, in mm.

Contact Insert Description

Number of contacts
3
Contact type
Sockets
Contact diameter
1.3 mm
Insulator material
PEEK
Wire cross section
20 AWG
Termination type
Solder
Termination diameter
1.1 mm
Reverse gender on request

Technical information

Max. creepage and air clearance distance
1.2 mm (Contact to contact)
Nominal current single contact
12 A
IEC 60512-5-2:2002 (DIN EN 60512-5-2:2003)
Nominal current insert
12 A
VDE 0298-4:2013
Test voltage
1.9 kV DC
SAE AS 13441: 1998 method 3001.1

All shown connectors are rated to a safety extra low voltage (SELV) of less than 50 V AC / 75 V DC, according to IEC 61140:2016 (VDE 0140-1:2016) Protection against electric shock – Common aspects for installation and equipment. In case other standards rule a specific use of the connector, the application specific safety criteria shall be considered first. In this context, lower voltage ratings may be valid. Warning: Danger to life for operating voltages above 50 V AC / 120 V DC!

Mechanical and Environmental data

Degree of protection*
IP50
Operating temperature
-50°C up to +120°C
Mating cycles
5000
*mated & unmated condition

Insulator Materials MEDI-SNAP®

StandardHousing - PSUInsulator - PEEK
Flammability rating UL 94 V-0/4.5 V-0/1.5
Operation temperature −50 to +170°C −50 to +250°C
Dielectric strengthIEC 60243-1:2013 (VDE 0303-21:2014)17 kV/mm19 kV/mm
Comparative figure of the creep resistance CTIIEC 60112: 2009 (VDE 0303-11:2010)150 175
Water absorptionASTM D 570:1998 / ISO 62:20080.3 %0.1 %
Sterilization (autoclaving)DIN EN 13060:2019-02 ~ 20 cycles> 200 cycles
Insulation resistanceIEC 60512-3-1:2002 (DIN EN 60512-3-1:2003-01)> 1 × 1012

Material and Surface Treatments

Housing
PSU gray
Color options
White
Contact
Cu-Alloy with Gold Finish

Mating Connectors

28 Result(s)

General Information:

All shown connectors are defined without breaking capacity (COC) according to IEC 61984:2008 (VDE 0627:2009).
The respective selected ODU connectors with data transfer functionality can transmit common data transmission such as HDMI® 2.0, USB® 3.2 Gen 1x1, FireWire® and eSATA®, but they are not HDMI®-, USB®-, FireWire®- and eSATA®-standard connectors.
ODU MEDI-SNAP® and MINI-SNAP® is UL-approved (E110586).
ODU reserves the right to make changes based on the current state of knowledge without prior notice without being obliged to provide replacement deliveries or refinements of older designs.
Back Add to notepad